Use and Care Manual

21$
9
Gas hook up (LP gas is
Standard)
A; LP: Open the front door,
install a standard 20lb LP
cylinder (Type 1) into the
opening of the grill
base(Note: the tank must be
hanging from the tank hook)
and connect the LP gas hose
with regulator assembly to the
LP cylinder.
Proper procedures for gas
leakage testing must be
obeyed. Please note the Gas
Hook-Up, Danger, and
Warnings pages for more
information.
The LP-gas cylinder valve
connection device must
properly and safely mate with
the connection device
attached to the inlet of the
(supplied) pressure regulator.
Always keep cylinder in
upright orientation to provide
vapor withdrawal!
B. Natural Gas: An Element
natural gas conversion kit
must be purchased. Gas hose
and orifices must be replaced
when using NG kit. Please
note the Danger and Warning
pages for more information
and compliance.
Only an Element NG Kit model
number FEANG1 can be used.
Any other kit used will void
the warranty.