Instructions / Assembly
WARNING:
IT IS EXTREMELY IMPORTANT TO CENTER THE BURNER ON THE ORIFICE PROPERLY TO PREVENT A FIRE
HAZARD OR EXPLOSION. PLEASE USE DRAWINGS BELOW FOR PROPER PLACEMENT REFERENCE. PLEASE
NOTE THAT WHEN PROPERLY INSTALLED, BOTH SCREWS HOLDING THE BURNER IN PLACE WILL BE ABLE
TO SCREW IN WITHOUT FORCE.
Infrared Rear Burner:
Open the grill lid and remove the diffuser panel, grates, and burners. Remove the screws holding burner to
grill body by unscrewing counter-clockwise.
Rear Rotisserie Burner Orifice Cleaning:
With the burner removed, remove the orifice and shine a flashlight through the opening to ensure there is
no blockage. Use a needle to clear any debris. Be extremely careful not to enlarge the hole or break off the
needle. This should be done any time an obstruction is detected.
15
304HL T=1.0mm
304HL T=0.6mm
304HL T=1.5mm
304/2B T=1.0mm
304/2B T=0.8mm
304HL T=2MM
上盖支撑右










