User's Guide

Display introduce of setting board
PAGE 1 - Power-on status display
Power-on succeeds
Boot V+ 24.24V Power-on voltage display. The voltage needs to be
set in the rage and then it will continue to
operate.
-8 Check the difference between value of coil resonance
oscillation frequency and recorded value
Complete equation is±0, will display +999~-999 when
it has deviation
If the difference bigger than set item 25 [Limit]L-C
ACC GAP then will be locked and can’t finish the
start program
ResonantFreq 85.8KHz Resonant frequency composed of TX and capacitors
detected during power-on
P.O.S.T→OK Power . On . Self . Test pass
FuDaTong A6 Product name
#200304 Software version number YYMMDD
supply voltage is too low
Pow SelfTest Failure Power-on self-test failure
V+ 5.01V Detected voltage
Vin is too LOW Input Voltage is too low
Standard Vin =24.00V Recommending voltage using