User's Guide

PAGE B - ( Foreign Object Detection) Metal foreign body detection status
the detection before the electric power transmission
Wireless power transmitting
FOD LC SCAN Stop RX online. Wireless power transmitting, stop the
method of LC scanning and conduct the metal foreign
body detection
Before the Wireless power transmission
FOD SCAN GO.. Before the Wireless power transmission, conduct the
method of LC scanning and to conduct the metal
foreign body detection
SETBASIC→065 Differentiate the critical set basic value
ADJLIMIT→098 The system automatically adjusted differentiate
critical value, if lower than the value it will
target that there is metal foreign body therefore
not to launch the wireless power transmission
MEASURED→130 Measurement reading value, the bigger the value is
shows the lower the possibility of having metal
foreign body
4 Change volume during the LC scan frequency
3 Change volume during the LC detect the descend
length of FOD
+ 30 Differentiate the gap from reading value to the
critical value, the large the value is showing the
lower possibility of having metal foreign body