User's Guide

PAGE A - ( Foreign Object Detection) Metal foreign body detection status
The detection in the electric power transmission
Not in the electric power transmission
FOD RX Offline If not in the electric power transmission, and under
the RX offline condition, this page will be leave
unused with no action taken
Electric power transmitting
FOD RX Online RX online, in the wireless power transmission, in
the metal foreign body analysis
METAL RATIO: 0.0% The current judged metal foreign body probability is
0%, when the judging reaches to 99.9% it will cut
off the electric power transmission
1 2 3 4
T ▓
Metal foreign body judging signal intensity, one
block means in safe status, four full blocks means
there is metal foreign body
CATCH→ 225 The larger the current metal foreign body measured
value, the safer, there might not have the
possibility of metal foreign body
↓184 In this page, it is the smallest value of the
obtained metal foreign body measured value in the
past Press C to reset, the value is used for
observing that the minimum value that might be
occurred in metal foreign body judging in system
operation, it is used for assisting to set the
critical value
LEVEL→ 140 Judging the critical value, if the measured value is
lower than the value it will be judged having metal
foreign body
+85 The gap between the measure value and the critical
value 225-140=85