User's Guide

32.0 means 32.0 volt in the direct voltage behind
the RX port rectifier
313 The system calculates the RX voltage regulation
target value that is going to be set
The quantitative value is calculated according to
the system set value, which is used for
corresponding the sensor power supply system load
drive capability of the power supply and the
receiving end
Wireless power transmitting (thrust control off)
t-off Thrust control off
p07 Under the thrust application amount 07, the drive is
the full-thrust output, so its thrust application
amount will be relatively low
Wireless power transmitting
t61 Driver thrust decrement is 61
p49 Thrust application amount is 49
Wireless power transmitting
FULL The driver is on full-thrust output
2.25A The system current is 2.25A, when the system current
increases, it will automatically complement the
thrust, so the thrust application amount is lower
than 50