Skyflash Racing Drone Set User Manual With 720P Goggles and Course Obstacles
6.5ACROBATIC FLIGHT: FLIP & ROLL (360º)
Once you have experience at ying of the FTX Skyash you can continue to make progress and begin
performing amazing Flips & Rolls.
To perform a Flip & Roll in any of the speeds you can press the right control stick and then move it in any
of the four directions to perform a Flip & Roll in this direction.
Your Skyash has a fourth speed with which it is not necessary to press stunts to perform a Flip & Roll
manoeuvre.
To select it press the speed switch 3 times from the original conguration, so that the Skyash starts to
play a beep indicating that is in the fast/acrobatic mode.
Once selected only you must quickly shift the right control stick to any direction to perform a Flip & Roll.
Note: it is not recommended to perform Flip & Roll close to objects or persons.
6.6HEADLESS MODE FUNCTION
The Skyash comes equipped with a help of a ight aid based on the technology of the Compass, which
can be enabled or disabled depending on the need. The function of this aid is to allow the setting of the
forward direction of your Skyash from a xed point. Preferably this function must be activated before
take-o so that the forward direction is set correctly.
How to know which is the forward direction?
The forward direction will be xed when we switch on the headless mode function and this will be xed
into the Skyash from this moment. For example, if the Skyash is pointing north when we activate the
headless mode, this direction will be the forward direction at any time provided we do not deactivate the
headless mode whilst in ight.
How to activate the headless mode?
You must hold for 3 seconds the button ``Speed selector´´, then you will hear one ``beep´´, now the
headless mode is activated.
To disable it, the process is exactly the same, keep pressing the same button during the same interval of
time until you hear the beep stop intermittently.
To reset the forward direction and set a new one you only have to reboot your Skyash disconnecting
the battery and reconnecting it.
6.7RETURN HOME FUNCTION
The return home function is an aid of ight that is to return our Skyash in the backward direction that
was set initially.
How to activate the return home function?
Press down button Trim B and the Skyash begins to move in the backward direction that was set at the
time of takeo.
To disable the return home function, you will only have to perform any movement with the right control
stick.
Note: is not recommended to use this ight mode until you have enough experience to control your
X-Drone in regular mode.