Instructions
CS-2044-UD Ver. 1.01
Grouping Mode Instructions
This guide is intended to outline how to enable and use grouping mode. This
functionality is only compatible with CaddyTrek BAs, R2s, and Bigfoot units.
CaddyTrek CT2000 units are not supported.
1. Gather the players in the group that will be golfing and that also have
qualified CaddyTrek units.
2. While all handsets are in Standby (SB) mode and standing within five feet
from each other, press the remote directional buttons in the following
sequence: UP, DOWN, LEFT, RIGHT. Wait for all players to complete the
sequence and then press STOP together.
3. If done correctly the handsets will flash the four lights in sequence indicating
that the handsets are searching for the other players.
4. Once successfully grouped, the SB light and the OA light will blink together at
the same time on all handsets.
Problems Grouping
If one or more players did not do this correctly they will have ten seconds to
try again while the successful handsets are still searching (the lights will still
flash in sequence).
If some players become grouped (the SB light and the OA light will blink
together at the same time on all handsets that have successfully grouped)
the players who are grouped should re-enter the button sequence to break
the group and try again.