User's Manual

Solar Bluetooth GPS Receiver User Manual
-7-
Storage temperature: -40
o
C to + 85
o
C
Operation humidity: 5%R.H. to 95%R.H. no compressed
4. Start to Use
Step 1: Charge the battery in first use
Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Connect charge cable to the power plug at the
bottom and start charging
Power Indicator:
(1)Green LED blinking
àPower low/charging(see below detail described)
Bluetooth indicator
Power plug
(opened)
Power indicator
(2) Green LED stop to blink &light up
àcharge completed (LED will vanish when cable away)
Step 2: Power on, connect with Bluetooth
Push the power switch 1~2 seconds to Power on
Bluetooth indicator :
(1) Bluetooth host searching:
à3 pulses per second
(2) Bluetooth host connected:
à1 pulse per second
Power indicator
Bluetooth indicator
Power ON/OFF switch
Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.