*** USER’S MANUAL *** FCC ID : SBUFGPXSBT01
The Federal Communication Commission Statement This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.
Solar Bluetooth GPS Receiver User Manual -1-
Solar Bluetooth GPS Receiver User Manual Contents Caution------------------------------------------------------------------------------------------------------------ 2 0. Quick Start----------------------------------------------------------------------------------------------------- 2 0.1. Inside the package------------------------------------------------------------------------------------ 2 0.2. Connect to your PC/PDA---------------------------------------------------------------------------- 2 1.
Solar Bluetooth GPS Receiver User Manual Caution Read before you start to use: Ø Global position system (GPS) is obtained by American Ministry of National Defense, and they got the full responsibility about the preciseness and the maintenance. Any changes may cause the capacity and preciseness of GPS differed. Ø If you use this device inside of buildings, tunnels, or any huge objects beside you, the GPS signals might be cut-off or disturbed. Please do not consider that the receiver is malfunction.
Solar Bluetooth GPS Receiver User Manual Bluetooth GPS receiver outdoor or open sky at least 15~20 minutes for sure 3D position fixed and almanac updated. 1. Introduction Solar Bluetooth GPS Receiver is a total solution of GPS receiver. High capacity rechargeable lithium-ion battery and solar charger circuit build-in, GPS antenna, Blue tooth transmit/receive system are included.
Solar Bluetooth GPS Receiver User Manual Shorten TTFF effectively 5)Automatically almanac/ ephemeris update in flash mmory programmable flash utility to do refresh on satellite orbit data information every 10 minutes. 6) Smart power management solution. GPS Device will automatically shutdown in case of bluetooth un-detected over default time. 7) Compatible with Bluetooth Serial Port Profile (SPP) completely.
Solar Bluetooth GPS Receiver User Manual Velocity: 515m/sec(700knod) Acceleration: 4G(G for gravity unit) Jerk: 20m/sec 3.5. Power management A)Applied External Voltage : 5V DC +/- 5%(via charge cable) B)Power system: Main battery: Rechargeable Lithium-ion 3.7V battery, as the main power. Backup battery:on board 3V backup battery for RTC(Real Time Clock) operating in idle .
Solar Bluetooth GPS Receiver User Manual o o Storage temperature: -40 C to + 85 C Operation humidity: 5%R.H. to 95%R.H. no compressed 4. Start to Use Step 1: Charge the battery in first use Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Solar Bluetooth GPS Receiver User Manual Step 3: GPS function test In firstly Use of this Receiver,we strongly recommend to bring your Solar Bluetooth GPS Receiver outdoor and open sky at least 15~20 minutes for almanac update. Power on the Solar Bluetooth GPS Receiver GPS Acquisition & Power indicator GPS Acquisition Fix Indicator (1)Red LED lights up continuously: Inquiring (2)Red LED blinks (1 pulse/3 secs): Position fixed 5. Software/Hardware Usage 5.1. Hardware description 1).
Solar Bluetooth GPS Receiver User Manual 2).
Solar Bluetooth GPS Receiver User Manual 3) If not found, please create a Bluetooth serial port by yourself. The configuration should be like this: Name it as you wish Please uncheck the secure connection 4) If there is already one, please check the content. Some Bluetooth device will enable the secure connection. Please refer to the configuration as above to uncheck it. 5) Power on your Solar Bluetooth GPS Receiver .
Solar Bluetooth GPS Receiver User Manual 8) Right click on the icon, select the [Discover Available Services]: 9) You should find the service SPP slave, right click and select [Connect to Bluetooth Serial Port]: 10) The follow message will show: 11) And the connection successful message: -11-
Solar Bluetooth GPS Receiver User Manual 12) Back to the Bluetooth service view, you should see the icon changed to [Connected]: 13) If you wish to use the connection more easily next time, you can create a shortcut for this: 14) You will see the shortcut you just created: 5.3. Configuration setup with PDA connection Following will show how to configure the Bluetooth connection on PDA, and how to install the GPS Viewer software. It may be different from other PDA models.
Solar Bluetooth GPS Receiver User Manual indication: the blue for Bluetooth blinks 3 times/sec. It means the Solar Bluetooth GPS Receiver Bluetooth module is activated and waiting for connection. The red LED for GPS, means the GPS module is activated and is inquiring GPS signal.
Solar Bluetooth GPS Receiver User Manual [Next]. In the next page, click the box to search Bluetooth devices. Your PDA will find the Bluetooth GPS and show it in the window. Click the icon to search for service. 6) Back to the [Explore a Bluetooth device] as below. Click [Next] to list service on Bluetooth GPS. [SPP slave] should appear in the service list box, click it and click [Next] to finish shortcut creation. Don’t forget to uncheck the secure connection box.
Solar Bluetooth GPS Receiver User Manual 8) You may start to use any map/navigation software and use the GPS function now. Or you can use the GPS Viewer software bounded in our CD-Rom to verify the function of Solar Bluetooth GPS Receiver as you wish. 5.4. GpsViewer Software Install/Usage Guide After the Bluetooth connected, you may use Solar Bluetooth GPS Receiver in any software support GPS function. We have provided you the software: GPS Viewer, for you to test the basic function of GPS.
Solar Bluetooth GPS Receiver User Manual 2) Insert the CD-Rom into your CD drive. If your auto-run function works, you will see the welcome screen as below: 3) Select the language you preferred.
Solar Bluetooth GPS Receiver User Manual 5) Click the [Install] at the right screen. The setup screen will show up. Please follow the screen guide to install step by step: 6) If your PDA is connected correctly, the installer will call Microsoft active synchronize and install it. You can install them right now. The install procedure is complete.
Solar Bluetooth GPS Receiver User Manual 7) The installer will create an icon on your desktop. Please double-click it to start program: 8) GPS Viewer main screen will shows up, please select the proper COM port ID and baud rate, and click [Open GPS] to begin the test. The COM port id is COM5 in our PC; please select the corresponding ID base on your Bluetooth manager.
Solar Bluetooth GPS Receiver User Manual 11) Here is the main screen of GPSViewer, and the basic function description as below: (1) (4) (2) (3) (6) (5) (7) (8) (9) (1) Com Port: COM port ID to connect with GPS device. (2) Baud rate: COM port data transfer rate. (3) Scan: Search the COM port ID automatically. (4) Open GPS: Connect to GPS receiver. (5) Power Save: The GPS receiver working in an extremely low power cost, extra power saving mode is not necessary.
Solar Bluetooth GPS Receiver User Manual 13) Click [GPS Status] to see the satellite view. If the GPS receiver can acquire position successful, the position fix result will show as below: 6. Warranty The Bluetooth GPS receiver is warranty for free from defect in material and function for 1 year from the date of purchase. Any failure of this product within the period under normal conditions will be replaced at no charge to the customers.
Solar Bluetooth GPS Receiver User Manual 7.1 Problem of Setup Error/Problem Cause Trouble shooting Can not find the GPS Install not correct or battery low device through Bluetooth interface Check if Solar Bluetooth GPS Receiver is installed properly, and confirm the battery level is suitable (green LED blinks or none LED) Unable the connect through Bluetooth Configuration incorrect Please refer section 5.2 to re-install. Or refer to your PDA’s user manual for configuration.
Solar Bluetooth GPS Receiver User Manual n Ø Covers above, GPS signal is blocked. Ø Inside buildings, GPS signal is blocked. Ø Beside some buildings, GPS signal is disturbed. Ø Inside forests, or too many covers, GPS signal is disturbed. If you use Solar Bluetooth GPS Receiver inside the car, some anti-sunlight windscreen film will makes the GPS signal degrade or signal lost . n GPS satellite is owned by America military, sometimes they will tune-down the accuracy by some reason.
