User's Manual

Bluetooth GPS Receiver User Manual

-6-

3.8. Miscellanea:

Bluetooth transmit frequency: 2.4~2.48GHz

Bluetooth input signal sensitivity: -80dbm

Minimal GPS signal sensitivity: -175dBW

GPS antenna type: Internal passive antenna

LED display: Build-in 3-LED display to show the Bluetooth, battery and GPS status.

4. Start to Use

Step 1: Charge the battery

Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly. There

are 3 ways to charge: purchase the plug type charger. Second, use standard NOKIA

(*) cell phone

charger, third, use the NOKIA

6015 cell phone desk stands to charge the battery pack inside.

Connect the power cord to the power plug at the

bottom and start charging

Power indicator: Green LED blinking

Power low

Power indicator

Power plug

Power indicator: Green LED lights

Charging

Step 2: Power on, connect with Bluetooth

Push the power switch about 1 sec to turn on

FGPXBT01

Searching Bluetooth device: the Bluetooth

indicator blinks (3 times/sec)

Power switch

Bluetooth indicator

Bluetooth connected: Bluetooth indicator blinks

(1 time/3 secs)

Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.

Step 3: GPS function test

Bring your FGPXBT01 to outdoor or any coverless above helps the sensitivity of GPS signal

receiving.

Power on the FGPXBT01

Red LED lights up continuously: Inquiring

GPS indicator

Power switch

Red LED blinks (1 time/3 secs): Position fixed

*: NOKIA

is the trademark of Nokia Co.