User's Manual

Bluetooth GPS Receiver User Manual
-11-
14) You will see the shortcut you just created:
5.3. Configuration of connect with PDA
Following will show how to configure the Bluetooth connection on IPAQ 2210 Chinese
version, and install the GPS Viewer software. It may be different between other PDA models.
1) Power on your PDA as the Bluetooth host.
2) Power on the FGPXBT01. If the battery level is full, you should see 2 LEDs indication: the blue
for Bluetooth blinks 3 times/sec. It means the FGPXBT01 Bluetooth module is activated and
waiting for connection. The red LED for GPS, means the GPS module is activated and is
inquiring GPS signal.
Red LED
Blue LED blinks 3 times/sec
3) See the IPAQ 2210 screen, click Bluetooth mark at bottom, and [Bluetooth Manager] as below: