User's Manual

Mini Solar Bluetooth GPS Receiver User Manual
-6-
4. Start to Use
Step 1: Charge the battery in first use
Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Connect charge cable to the power plug at the
bottom and start charging
Power Indicator:
(1)
Green LED blinking
àPower low/charging (see below detail described)
Bluetooth
indicator
Power
indicator
Charge plug
(2) Green LED stop to blink &light up
àCharge completed (LED will vanish when cable away)
Step 2: Power on, connect with Bluetooth
Push the power switch 1~2 seconds to Power
on
Bluetooth indicator:
(1) Bluetooth host searching:
à3 pulses per second
(2) Bluetooth host connected:
à1 pulse per second
Bluetooth indicator
PowerON/OFF switch
Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.
Step 3: GPS function test
In firstly Use of this Receiver ,we strongly recommend to bring your Bluetooth GPS Receiver
outdoor and open sky at least 15~20 minutes for almanac update.
Power on the 2.5MR Bluetooth GPS
Receiver
GPS Acquisition Fix Indicator
(1) Red LED lights up continuously:
Inquiring
GPS Acquisition &
Power indicator
(2) Red LED blinks (
1 pulse/3 sec):
Position fixed