User`s manual

User’s manual · TWSF 310 CI
- 7 - TWSF 310 CI version_en_1.0 FTE maximal
- Settings: This option allows saving and loading the configuration of the
module,
carrying out firmware update or making an adjustment of the time and date of
the module.
- Clock:
- Set Date and time: Setting of the date and time of
transmodulator. It is appropriate to maintain these parameters
set in order to have the registration of errors linked to the
current time and date.
- Set date/time all devices: Loading the current date and time
of the module in the rest of interconnected modules.
- Alias:
- Write alias: It allows you to assign a name/alias to the
module you are programming. Option only available when the
Alias Auto option is configures as “none” (manual mode).
- Auto Alias: It allows configuring the name/alias of the
modules automatically. Options: Channel, Frequency, Service,
None.
- Upgrade:
- Send Firmware from USB: It allows carrying out the firmware
update from the USB device.
- Send firmware to all: It allows carrying out the update of all
the modules that are interconnected at the same time.
- Configure all devices:
- Input values to all devices: It allows copying the current input
configuration in all the interconnected modules.
- Modulator values to all devices: It allows copying the
configuration of the current modulator in all the interconnected
modules.
- Output values to all devices: It allows copying the current
output configuration in all the interconnected modules.
- Factory default to all devices: It allows making values by
default to all the interconnected modules.
- Activate next output:
- It allows activating or deactivating the output of the second
Unit.