User`s manual

User’s manual · TWSF 310 CI
- 4 - TWSF 310 CI version_en_1.0 FTE maximal
1.4.2. Programming
Below you will find the steps to follow in order to make the programming both from corresponding EVO and MINI field
strength meter as well as from PRO 201.
mediaMAX EVO / mediaMAX MINI
In order to start programming the TWSF 310 CI transmodulator, you will have to go to “Tools” option through the key 8 of
your field strength meter and to select the “Transmodulator Prog.“ option.
Then, it will proceed to recognize the module and to show the main menu. In the “Transmodulator Prog.” are shown the
different configuration options that this tool offers:
1. Select Device
The field strength meter allows carrying out the programming of one or several transmodulators from an only
transmodulator.
Without interconnection of modules.
An only module connected.
It will allow you to choose between two units with an only
device connected to the programmer (Unit 1 or Unit 2).
Interconnection of several modules, you can select which
module you wish to program.