User`s manual

User’s manual · TWSF 310 CI
- 16 - TWSF 310 CI version_en_1.0 FTE maximal
1.5. Accessories and example of installation
Example of installation
Installation that consist of 6 TWSF 310 CI and that will
allow tuning channels up to 12 different transponders and
to distribute them through a TV network in DVB-T. The
TWSF 310 CI with twin output allow distributing up to 12
multiplex in the installation. The distributed channels need
a terrestrial receiver in order to be decoded.
The number of modules that can be fed by the power supply SPS 310 will depend on the number of
CAM’s and their consumptions:
- If the total amount of modules that are connected to the power supply have two CAM’s
inserted, the SPS will be able to feed only 5 modules.
- In any other case, the power supply will be able to feed 6 modules.
- From the 4th installed module on, it is necessary to use the long bus cable for the feeding.
The three first modules are fed with short bus cables
The power connection between modules using the bus cables requires rolling the
cables to minimize radiations effects.
In order to guarantee the right running of the different equipments of the
installation, we recommend you to provide the inputs and outputs which are not
used with a 75Ω load.
Accessories
Programmer
Mod. PRO 201
Code 2003123
High Definition field strength meter
Mod. mediaMAX MINI S2CT HD
Code 3001048
Field strength meter
Mod. MediaMAX MINI S2T
Code 3001026