User`s manual

User’s manual · TWSF 310 CI
- 15 - TWSF 310 CI version_en_1.0 FTE maximal
-
(1)
Change service name: It allows changing the name of the service manually.
-
(1)
LCN: The LNC function allows assigning automatically a predetermined
position to each one of the services of the multiplex. This function will allow the
users who have a receiver with LNC support to make the ordination of channels
automatically.
Select a channel through Left/Right buttons and introduce the position. Press
the “OK” button and the cursor will be placed over the number. With the keys of
the cursor, we can move through all the digits and change the values. Press
“OK” in order to save the changes.
Note: If in the existing installation there are already services that have LNC system, you will have to configure
the position of the module services in order to avoid conflicts with other net services.
-
(1)
Decrypt services: From this option you can add or remove manually the services that are being decoded by the card:
- Delete services
- Add services
-
CAM Reset : It allows making a reset in the selected CAM.
- CI menu: From here you can reach the menu of the card inserted in the CAM.
- Date / Hour: Setting of the date and time of transmodulator. It is appropriate to maintain these parameters set in order to
have the registration of errors linked to the current time and date.
- SW version info: It allows you to visualize the basic information of the module: model, firmware version, etc.
- MUX number: It configures the number of output multiplex. Options: 1 or 2.
- Global Update: It allows carrying out the update of all the modules that are interconnected at the same time.
Note:
(1)
You have to select in which one of the two modules you want to make the configuration in each case.
TWSF 310 CI
LCN:00004 arte HD