User`s manual

User’s manual · TSF 310 CI
- 11 - TSF 310 CI version_en_2.0 FTE maximal
Next it is attached the identification table (NID/ONID) of the main satellites. You will be able to find more information in
the law ETSI TR 101 162 v1.2.1.
Satellite Net ID Original Net ID Description
Hotbird 13ºE (Eutelsat 13ºE) 318 318 Eutelsat 13ºE System
Astra 19.2ºE 1 1 Astra Satellite Network 19,2ºE
Astra 23ºE 3-25 3-25 Astra n (n=1-23)
Astra 28,2ºE 2 2 Astra Satellite Network 28,2ºE
Nilesat 7ºW 2048 2048 Nilesat 101
Hispasat 30ºW 33 33 Hispasat Network 1
9. Common Interface
This option allows checking the information and configuring the parameters
regarding the conditional access.
- Selecting Slot: It selects the Slot where the CAM for decoding the
services is inserted.
- CI Menu: From here you can reach the menu of the card inserted in the
CAM.
- Decrypted: From this option you can add or remove manually the
services that are being decoded by the card.
- Deactivating all decrypted: From this option you can remove all the
services that are decoding the conditional access card.
- CAM Reset: It allows making a reset in the CAM.
- Watchdog CAM: In cases where the encoded services stop working you
can use one of the following options.
- Deactivate: No actions will me made in the CAM.
- Update: When it is detected that the decryption of the CAM
has been lost, the rights will be sent systematically until the
decryption gets back.
- Reset: As soon as the loss of decryption of the CAM is
detected, a reset will be made.
- Both: Once the loss of decryption of the CAM is detected, the
rights will be sent several times until the decryption gets back. In
cases where it does not get back the module will make a reset
of the CAM.
- CAM Reset after: It makes a reset of the CAM alter a set period of time.
Options: 0, 5 min , 10 min, 15 min
PRO 201
Note: From PRO 201 programmer you can only carry out the programming of a single module, in order to carry
out the programming of several modules at the same time you have to use a mediaMAX EVO or mediaMAX
MINI series field strength meter.
When you connect the PRO 201 programmer, it will proceed to recognize the
module and to show the main menu.
In the main menu are shown the different options for configuring the
transmodulator.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to the different options, and to get into the
submenus we have to press “OK” button.
TSF310CI
>Manual< Config
Auto