User`s manual

User’s manual · TSF 310 CI
- 10 - TSF 310 CI version_en_2.0 FTE maximal
- Bandwidth limitation: It allows selecting the % of the capacity of the output
channel.
- Auto service addition:
- On: It selects the services automatically when an input carrier is tuned
and when the list of selected services is empty. The receiver will have
this state by default.
- Always: It selects the services automatically every time a new input
carrier is tuned. This state is only recommended to be used for making
test in the module.
- Off: The automatic mode is deactivated; the services have to be
manually selected.
- Advanced settings:
- Network: It allows making the adjustment of the identification
parameters of the multiplex.
- TS ID: Transport Stream identification value. It is
recommended to configure a value different from TS ID for
each one of the output multiplex configured.
- Net ID: Net identification value
- Original Net ID: Original net identification value
- Network Name: Name associated with the net.
- Tables: It allows modifying the value of the following
information tables of the DVB, NIT, SDT and PAT services.
- Services:
- Change service name: It allows changing the name of the
service manually. In order to do so, please choose the service
in the first line and then write the new name in the second line.
Then you have to press “modify” in order to save the changes.
- HDSimulCast: In cases where we receive in an installation
the same channel in high definition and in standard definition,
the HD Simualcast function allows to exchange the position of
the LNC of both channels. If the user has a device compatible
to HD Simulcast and the module has been correctly
configured, when tuning the standard definition channel, it will
move to its position in high definition automatically. This option
allows modifying manually the position of the LNC, exchanging
the standard position into the high definition position. In the
first line you have to select the high definition service and in
the second line you have to select the same service but in
standard definition.
- Change in Service ID: From this position you can change the
PID Number of the chosen service.
Change service name HDSimulCast Change in Service ID