User`s manual

User’s manual · TFF 310 CI
- 9 - TFF 310 CI version_en_1.0 FTE maximal
Removing services:
1. Select the “Service to remove”
option.
2. Select one of the multiplex
services you want to remove.
3. Once you have chosen the
service, select the “Add/Remove”
button to remove the service in
the multiplex.
- Remove all services: It allows removing all the services included in the multiplex.
- Modify LCN: The LNC function allows assigning automatically a predetermined
position to each one of the services of the multiplex. This function will allow the
users who have a receiver with LNC support to make the ordination of channels
automatically.
Note: If in the existing installation there are already services that have
LNC system, you will have to configure the position of the module
services in order to avoid conflicts with other net services.
- Bandwith limitation: It allows selecting the % of the capacity of the output
channel.
- Auto service addition:
- On: It selects the services automatically when an input carrier is tuned and when the list of selected services is
empty. The receiver will have this state by default.
- Always: It selects the services automatically every time a new input carrier is tuned. This state is only
recommended to be used for making test in the module.
- Off: The automatic mode is deactivated; the services have to be manually selected.
- Advanced settings:
- Network: It allows making the adjustment of the identification
parameters of the multiplex.
- TS ID: Transport Stream identification value. It is recommended
to configure a value different from TS ID for each one of the
output multiplex configured.
- Net ID: Net identification value
- Original Net ID: Original net identification value
- Network Name: Name associated with the net.
- Tables: It allows modifying the value of the following
information tables of the DVB, NIT, SDT and PAT services.