User`s manual

User’s manual · TFF 310 CI
- 14 - TFF 310 CI version_en_1.0 FTE maximal
- Delete LOG file: It allows deleting all events stored until this moment.
- Factory default: This option restores the values by default of the transmodulator.
- Update FW: It allows carrying out the firmware update from the programmer.
- Output services: This option allows making the selection of the services that you wish to include in the output multiplex.
Once you have tuned a multiplex and you have selected the DVB-T/DVB-H modulator configuration, you can make the
assignment of the services that are going to be included in the output multiplex “Adding/Removing services”.
- Add Services
1. Select the option “Add services”
through Up/Down buttons. Press OK
to continue.
2. Select one of the multiplex services
you want to add, through Left/Right
keys and select the “+Add” button to
include the service in the multiplex
3. A window will appear and it will let
you know that the operation made has
been correct.
- Delete Services
1. Select the option “Delete services”
through Up/Down buttons. Press OK
to continue.
2. Select the service you want to
delete with the Left/Right keys. Then
press OK over “-Rem” in order to
remove it, or press OK over “--All” in
order to delete all the services of the
multiplex.
3. A window will appear and it will let
you know that the operation made has
been correct.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
- LCN: The LNC function allows assigning automatically a predetermined position
to each one of the services of the multiplex. This function will allow the users who
have a receiver with LNC support to make the ordination of channels
automatically.
Select a channel through Left/Right buttons and introduce the position. Press the
“OK” button and the cursor will be placed over the number. With the keys of the
cursor, we can move through all the digits and change the values. Press “OK” in
order to save the changes
Note: If in the existing installation there are already services that have LNC system, you will have to configure
the position of the module services in order to avoid conflicts with other net services.
- Decrypt services: From this option you can add or remove manually the services that are being decoded by the card:
- Delete services
- Add services
- Date / Hour: Setting of the date and time of transmodulator. It is appropriate to maintain these parameters set in order to
have the registration of errors linked to the current time and date.
- SW version info: It allows you to visualize the basic information of the module: model, firmware version, etc.
- Global Update: It allows carrying out the update of all the modules that are interconnected at the same time.
TFF 310 CI
Operation finish
TFF 310 CI
Input 083 %
PID: 03587 mola TV
-Rem --All
TFF 310 CI
BW usage 083%
>Delete services
Add services
TFF 310 CI
Operation finish
TFF 310 CI
Input 035 %
PID:03587 mola TV
+Add
TFF 310 CI
BW usage 000%
Delete services
>Add services
TFF 310 CI
LCN:00004 mola TV