User`s manual

User’s manual · TFF 310 CI
- 13 - TFF 310 CI version_en_1.0 FTE maximal
2. Auto
This option allows saving and loading the configuration of the module in the PRO
201 programmer.
- Read from module: It stores the current configuration of the module in the memory of the programmer. The steps to
make a correct reading of the headend are specified below:
1. Select the option “Read from
module” through Up/Down buttons.
Press OK to continue
2. Select the position of “CFG”
memory where you wish to save the
current configuration of the module.
3. A window will appear and it will let
you know that the reading made has
been correct
- Write to module: It loads in the module one of the configurations previously saved in the memory of the programmer. The
steps to make a correct configuration of the headend are specified below:
1. Select the option “Write to module”
through Up/Down buttons. Press OK
to continue
2. Select the position of the “CFG”
memory that you wish to copy in the
module. Please verify that the data of
the selected memory correspond to
the channel that you wish to copy.
3. A window will appear and it will let
you know that the configuration made
has been correct
3. Config
In “Config” option the information concerning the regenerator is given.
- Read log: It allows reading the registered events in the module.
1. Select the option “Read LOG file”
through Up/Down buttons. Press OK
to continue
2. Press OK again to show the log file. 3. A new window will appear. It will
show the information about the
registered events in the module. Press
the following keys in order to scroll up
and down the screen: “up/down”.
TFF 310 CI
N:00001 Status:00
15/02/11 09:15:40
System Ok
TFF 310 CI
OK to Show LOG
TFF 310 CI
Global Update
>Read LOG file
Delete LOG file
TFF 310 CI
Operation finish
TFF 310 CI
CFG:01
Frec:474000
Output Freq:562000
TFF 310 CI
> *Write to Module *
*Read from Module*
TFF 310 CI
Operation finish
TFF 310 CI
CFG:03
Free position
TFF 310 CI
> *Read from Module*
*Write to Module *
TFF 310 CI
> *Read from Module*
*Write to Module *
TFF 310 CI
Global Update
>Read LOG file
Delete LOG file