User`s manual

User’s manual · TFF 310 CI
- 11 - TFF 310 CI version_en_1.0 FTE maximal
Next it is attached the identification table (NID/ONID) of the main satellites. You will be able to find more information in
the law ETSI TR 101 162 v1.2.1.
Satellite Net ID Original Net ID Description
Hotbird 13ºE (Eutelsat 13ºE) 318 318 Eutelsat 13ºE System
Astra 19.2ºE 1 1 Astra Satellite Network 19,2ºE
Astra 23ºE 3-25 3-25 Astra n (n=1-23)
Astra 28,2ºE 2 2 Astra Satellite Network 28,2ºE
Nilesat 7ºW 2048 2048 Nilesat 101
Hispasat 30ºW 33 33 Hispasat Network 1
9. Common Interface
This option allows checking the information and configuring the parameters
regarding the conditional access.
- Selecting Slot: It selects the Slot where the CAM for decoding the services is
inserted.
- CI Menu: From here you can reach the menu of the card inserted in the CAM.
- Decrypted: From this option you can add or remove manually the services that
are being decoded by the card.
- Deactivating all decrypted: From this option you can remove all the services that
are decoding the conditional access card.
PRO 201
Note: From PRO 201 programmer you can only carry out the programming of a single module, in order to carry
out the programming of several modules at the same time you have to use a mediaMAX EVO or mediaMAX
MINI series field strength meter.
When you connect the PRO 201 programmer, it will proceed to recognize the
module and to show the main menu.
In the main menu are shown the different options for configuring the regenerator.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to
the different options, and to get into the submenus we have to press “OK” button.
TFF 310 CI
>Manual< Config
Auto