User`s manual

32
User’s Manual - mediaMAX MINI
Reserved of technical modifi cations and/or errors
ENGLISH
rev 2.1
With the spectrum on screen, move the rotary wheel to sweep the frequency band to spot the target
signal. In order to semplify the navigation through the terrestrial band, press the
“nav” key for select
channel mode or frequency mode.
Channel mode allows to sweep the frequency band by channel defi ned in the standard
Frequency mode allows to sweep the band normally by frequency with 50 KHz steps
10.1.3 Measurement selection
With the target signal identifi ed, it’s necessary to select the signal type (analog or digital). Press
“op-
tions”
key, select “Carrier mode” and there will be two differents options:
Analog: if analog signal
Digital: if digital signal
Select one of them and confi rm clicking the wheel.
•
•
1.
2.