User`s manual

28
User’s Manual - mediaMAX MINI
Reserved of technical modifi cations and/or errors
ENGLISH
rev 2.1
In this screen you can select the languages of the menus, the RF Standard, the Date and the Time
of the meter. Use the rotary key to change them and select the correct values.
9.4 RF cable connection
Connect the input RF coaxial cable to RF-IN F connector, once the FBU-FBU adaptor has been
installed.
If necessary, for future replacement of the adaptor it’s important to installa a high quality adaptor that
don’t disturb input signal or create impedance problems. In this way it will be possible supply the meter
with a real quality RF signal.
9.5 TV standard setup
It’s important to setup the right TV standard in order to work correctly with the meter. It’s possible
also to setup the measurement units. To do it, press “setup” key on the front panel. After this,
select “RF” option using the rotary wheel. Finally, select the second option “Terrestrial standard”
and accept clicking on the wheel.
Measurement units could be selected pressing “setup” key and selecting “units” option. The available
options are dBuV, dBmV and dBm based on user’s preference.