User`s manual

27
User’s Manual - mediaMAX MINI
ENGLISH
Reserved of technical modifi cations and/or errors
rev 2.1
9 METER OPERATION
9.1 First time operation
Before using your meter for the fi rst time, please charge it completely (follow the indications in the
chapter “Meter’s Power Supply” (The battery is completely charged at the factory once the meter is
fi nished, but the battery may be low when you purchase it).
9.2 Meter starting up
The
mediaMAX MINI fi eld strengh meter is ready to begin work with it, therefore there is not any kind
of installation to do for starting it up.
Press the ON/OFF key to switch on the meter. The power may be supplied through the mains or
through the internal battery.
Once it has been switched on, the monitor shows a picture with Fte maximal logo, meter serial num-
ber and current fi rmware version. This information is important if customer service is requested for
technical support regarding the meter.
9.3 Factory default
You can fi nd this option in the menu “Set Up --> System --> Default Values”. Once you have selected
it, it resets the meter, getting back to the factory default values.
After executing the Default Values, the following screen will be shown: