User`s manual

User’s Manual - mediaMAX MINI

Reserved of technical modiﬁ cations and/or errors

ENGLISH

rev 2.1

8 CONNECTIONS

All the meter connections are available in the back panel. The conectors and indicators are:

DC IN. Supply conector for the 20V external power supply

STBY LED. Blinks when the meter is in standby mode and when the ﬁ rmware is being

updated

CHG LED. Blinks when the meter is charging, and stays continuously on when the charge is

completed

RF INPUT. This F male conector is the signal input for the meter. It is necessary to plug

the provided female-female F adapter (FBU-FBU) prior to plug the F male signal cable into the

meter

RESET. This button performs a hardware reset to the meter. The meter will be reset to its

default state. The date and time will be lost, but the general settings, programs and stored

mesasurements will be saved

RS232. This port allows updating the meter’s ﬁ rmware

USB 2.0. This port allows ﬁ rmware upgrades and data upload / downloads through USB mass

storage devices

A/V IN. This mini jack connector allows feeding analog audio/video (CVBS) into the meter

A/V OUT. This mini jack connector allows sending analog audio/video (CVBS) to other

devices

NOTE: For enabling/disabling the external video input you should push the key “3 Image” and

navigate up to the

“External Video” option. Please, select between On/Off to enable/disable the

external video input through the Mini Jack A/V IN connector.

Support for External Hard Disks USB 2.0 directly fed from the meter

The MediaMAX MINI is capable of feeding the external hard disks USB 2.0 always that they

respect the limitation of current to 500 mA established in the USB norm.

•