User`s manual

47
User’s Manual - mediaMAX MINI HD
ENGLISH
Reserved of technical modifi cations and/or errors
rev 1.2
One device SatCR works shifting the frequency of the input signal to another fi xed intermediate fre-
quency, generating a narrow output sub band which will be called “pilot”. Combining different SatCR
devices, these pilots, which can belong to different LNB, with different polarizations, can be multi-
plexed and distributed through one single cable.
The option “Pilot number” allows selecting some of the available pilots.
Through the
options 2 and 3, we will select the polarity and band of the transponder we want to
associate with the selected pilot.
The option
“Initialize pilots” allows defi ning when the information exchange will happen (information
between LNB and the meter, being their option
Never, Always and Start). In this exchange, the LNB
informs about its basic features, like the number and frequency of the used pilots.
In case of one intermediate switch, the
option 5 allows selecting one of their positions.
Finally, the
option 6 allows adjusting the rest of parameters in each one of the 8 possible pilots.