User`s manual

40
User’s Manual - mediaMAX MINI HD
Reserved of technical modifi cations and/or errors
ENGLISH
rev 1.2
Symbol rate: This value should be fi xed based on broadcaster information
Mode: DVB, DSS. Normally DVB will be used.
Spectrum inversion: auto
Auto symbol rate: You will be able to select if the detection of the Symbol Rate is going to be
Automatic (On) or Manual (Off).
- In Manual mode (Off), the value of the Symbol Rate should be fi xed by the user based on
the provider’s information.
- In Automatic mode (On), the meter will automatically identify the SR when a Satellite carrier
is tuned. This feature is very useful when the provider’s information is unknown.
The SR value found will appear in the fi eld of selection of the SR menu. This value found by
the meter could not correspond exactly to the real broadcast SR, but to a very close value.
NOTE: The Automatic Symbol Rate feature does not work when the carrier quality is very
poor or/and with a very low Power Level.
DVB: To switch between the modes DVB-S and DVB-S2.
Constellation display: In this option you can choose the type of displaying of the constellation.
Pushing on the fi eld “Constellation Display” you can select:
- Off: Disables the viewing of the constellation.
- Full: Allows watching the 4 parts of the diagram (4 quadrants).
- 1: Allows watching the fi rst quadrant (higher – left).
- 2: Allows watching the second quadrant (higher – right).
- 3: Allows watching the third quadrant (lower – right).
- 4: Allows watching the forth quadrant (lower – left).
Once selected the quadrant to be represented, exit of the menu, and select the “meter” mode to be
able to see the constellation on the TFT monitor.
•
•
•
•
•
•