User`s manual

39
User’s Manual - mediaMAX MINI HD
ENGLISH
Reserved of technical modifi cations and/or errors
rev 1.2
With the spectrum on screen, move the rotary wheel to sweep the frequency band to spot the target
signal.
In satellite band, “nav” key selects only frequency mode to sweep the band normally by frequency
with 500 KHz steps.
10.2.4 Measurement selection
With the target signal identifi ed, it’s necessary to select the signal type (analog or digital). Press
“op-
tions”
key, select “Digital modulation” and there will be two differents options:
Analog: if analog signal
Digital: if digital signal
Select one of them and confi rm clicking the wheel.
For digital satellite signal, it is necessary setup signal parameters. Select “Digital modulation”. It is
necessary to setup symbol rate and mode:
•
•