Operation Manual

User’s Guide · MAX T115+
Technical changes and mistakes reserve - 8 - MAX T115+ Version_en_1.0 FTE maximal
1.4 Quick installation guide
Follow the instructions below in order to install the receiver in a quick and easy way.
First step: Connections
Connecting the antenna cable
Connect the wire coming from our DVB-T antenna or from our antenna to Antenna IN system distribution.
Connecting the TV device, LCD or video projector
Our TV or other vision device can be connected in different ways:
Scart plug / RGB In this connector you will find the best image quality in RGB and RGB-YUV modes.
This is the connector we will normally use for connecting the TV.
In order to do so, we should use a standard wire from scart plug to scart plug
Video / DVD In VCR-Scart a video or a DVD can be connected.
Also, the DVD signal can be watched by the means of the receiver if the TV is
connected through a scart plug
You will find more information in system adjustments.
You can find more information in the 0.2 back panel chapter.