Operation Manual

User’s Guide · MAX T115+
Technical changes and mistakes reserve - 19 - MAX T115+ Version_en_1.0 FTE maximal
8.1 Installation
When acceding to Installation menu, the screen showed on the side
will appear.
In this menu, press PR-,PR+ buttons to select the submenus and
press
buttons to highlight the wished element.
1. Antenna feeding: This option allows feeding the antenna input
with 5V. Activate it in case of having an active antenna. Options:
activated or deactivated.
2. Country configuration: Indicates the country where the receiver is
going to be installed.
3. OSD language: Selects the menu language of the receiver.
4. Audio language: Selects the audio language.
5. Subtitles language: Selects the subtitles language.
6. LCN: Arrange channels according to LNC parameters (Logic
number channel compatibility). Verify the LNC function is available in your country. Options: activate or
deactivated.
7. Usage of GMT:
We have to choose if we want to activate the time configuration according to Greenwich Time.
Options: activated o deactivated.
8. Time Zone: If we have activated the usage of GMT, we should introduce the time difference concerning
Greenwich Time. Options: +1h,+2h, +3h, etc.
9. Setting dates: If we have not activated the usage of GMT, we should introduce the current date manually.
10. Setting time: If we have not activated the usage of GMT, we should introduce the current time manually.
Press
buttons in order to move the highlighted element and make our choice.
Press the red button in order to access to “automatic search” menu or press green button to access to “manual search”.
8.2 TV configuration
When acceding to TV configuration, the screen showed on the side
will appear.
1. TV format: It is used for changing the screen appearance. There
are several available options: 4:3LB/4:3PS/16:9LB/16:9FIT. Use
buttons in order to move to the different modes in
circular.
2. TV mode: it is used for selecting the visualization mode in the
screen. There are three available modes: Auto, PAL and NTSC.
Use
buttons in order to move to the different modes.
3. OSD transparency: it is possible to configure the OSD
transparency in all the menu. Press
buttons in order to
select the possible values. There are eight transparency levels.
The lowest level, 1, indicates the most transparent, and the highest, 8, means that it is practically dull
4. Info time in screen: When the user changes the volume, he can adjust the time that the volume bar remains in the
screen too. Adjusting these elements he can modify the time that the superposition menu remains in the screen,
establishing the preferred period of time.
5. Video output: It is used to change the video output modes. There are two available modes CVBS and RGB. Press
buttons to determine the option.