Operation Manual

PAG.

rev 1.0

ENGLISH

1. PANEL & REMOTE CONTROL DESCRIPTION

1.1. FRONT PANEL DESCRIPTION

REMOTE CONTROL & PANEL DESCRIPTION

1.Remote Sensor: Detects the infrared signals from the remote control unit.

2.POWER LED: Shows the state of the receiver:

1. LED on: The receiver is on;

2. LED blinks slowly: The receiver is in Standby mode;

3. LED blinks quickly: The receiver is being updated through RS232 port;

4. LED off: The receiver is not supplied. Please, verify if the receiver is plugged or if the

switch at the rear panel is on.

1 2

1. RS-232: Serial Port allowing software upgrades

2. ANTENNA IN:Terr. input of the digital tuner.

3. LOOP OUT: Terr. ouput for cascading to others devices.

4. TV SCART: Output SCART for the connection to a TV set.

5. RCA A/V.

6. AC IN: Mains input cable.

7. POWER ON/OFF: Allows to completely switching off the receiver.

1 245 63 7

1.2. REAR PANEL DESCRIPTION