Operation Manual

PAG.
29
rev 1.1
ENGLISH
TOOLS
6. TOOLS
Press [Menu] in the TV mode to enter the main menu.
1. Press [ ] to select the Tools item.
2. Press [OK] to enter the selected item.
3. Enter the password. The default password is “0000”.
In the Tools menu (OSD 49):
3. Press [
] to select the wanted menu item.
4. Press [OK] to enter the selected item among.
- Information
- Factory Setting
- SatcoDX Auto Programing
- Software Upgrade by OTA
6.1. INFORMATION
1. When you select the “Information” menu you will see a
screen like beside (OSD 50). The screen displays data about
the current channel. This function is the same as the function
[Info] in the full screen TV mode.
2. Press [Exit] button to leave the information display.
6.2. FACTORY SETTING
When you press [OK] on the “Factory Setting” item:
1. A warning message will be displayed like the one beside
(OSD 51).
2. If you select “Yes” then all changes you made will be reset to
default values. Make sure you really want to do this!
3. Press [Exit] in both steps will close the window without
resetting the receiver.
6.3. SATCODX AUTO PROGRAMMING
This function is using the tables of the SatcoDX websites to
update your channel and satellite lists.
1. Start the SatcoDX application on your PC.
2. Select “SatcoDX Auto Programming” item from the “Tools”
menu and press [OK]. The screen will show the message
“Start” (OSD 52).
3. Press [OK] again and you will see the message “Receiving
data” (OSD 53).
4. In the PC application set the Baud Rate to 115200 and start
the download procedure.
! Caution: The new download channels will delete the original
channels list. Please be careful before using it.
OSD 49
OSD 50
OSD 51
OSD 52