Operation Manual

PAG.
28
rev 1.1
ENGLISH
SYSTEM SETUP
] in order to select between “Black screen” or “Freeze” (it
will show the frozen image of the cannel you were watching).
5.8.4. BEEPER
If you select “Beeper” option as “On”, when you are tuning
channels, the receiver will announce a tone according to the
level of power of the received signal.
5.8.5. AUTO STANDBY
This option will allow you to activate or deactivate the automatic
Standby option. Options: On, Off.
-On: The receiver will be in standby mode automatically after
3 hours, as long as during this time no commands have been
sent to the receiver through the remote control or buttons of
the front panel, and no programmed timers are run.
-Off: Auto standby function gets deactivated.
Use [ ] in order to turn this option on/off.