Operation Manual

PAG.
27
rev 1.1
ENGLISH
2. OSD Timeout: This setting determines the duration the info
window is displayed on the screen when you change channels.
Press [ ] to set the time between 1 to 10 seconds.
3. OSD Transparency: With this parameter you can set the
transparency of the menus. Press [ ] select the value
between 10%, 20%, 30%, and 40% and “NO” (means no
transparency function).
5. Press [Exit] button to leave the “OSD Setting” menu.
5.7. FAVORITE
In this menu, user is able to change the name of the Favourite
Groups. Press [OK] to enter this menu and you will see a screen
like beside (OSD 46).
To change the name of the Favourites Groups:
1. Press [ ] and select a Favorite Group.
2. Press [Ok] button to edit the name of the Group.
3. Once the name is correct, confi rm pressing [Yellow] button
(OSD 34).
4. If the name is used by other group, an alert message will
appear on the TV.
5. Select “Exit” and press [OK] to leave this menu.
5.8. OTHER
When you select “Other” you will see a screen like OSD 48:
5.8.1. LNB POWER
Here you can set the power output to the LNB. If your receiver
is connected to the LNB directly then you need to set the
LNB Power to “On”. If your receiver is connected to a multi
switch (SMATV signal distribution system) then it may be that
you don’t need to provide the power to the LNB. But since
this is depending on the kind of installed distribution system we
recommend you to contact your installer or to refer to the user
manual of this system to get the correct information.
You also just can change this setting and check if you still can
receive the channels. If the LNB Power is off and you still can
see all channels then we recommend this setting.
5.8.2. CHANNEL PLAY TYPE
In this option you will be able to choose which type of channels
the receiver shown every time it starts. Press [ ] in order
to select among All, Free or Scrambled.
5.8.3. CHANNEL CHANGE
From this option you will be able to select the effect that will be
shown in the screen every time you change the channel. Press [
SYSTEM SETUP
OSD 47
OSD 46
OSD 48