Operation Manual

PAG.
25
rev 1.1
ENGLISH
Italian, Portuguese, Turkish, Polish, Russian, Arabic, Farsi.
6. Press [Exit] to return back from “Language” menu.
5.2. TV SYSTEM
When you enter the “TV System” menu you will see the screen
like below (OSD 40):
1. Display Mode is used to switch the display mode. You can
select from Auto / PAL / PAL-M / PAL-N / NTSC. Press [
] to select the desired mode.
2. Aspect Mode is used to switch the screen aspect ratio mode.
You can select from 4:3 PanScan / 4:3 LetterBox / 16:9.
Press [ ] to select the needed mode.
3. Video Output is use for switching the screen aspect ratio
mode. Now we provide below options: RGB / CVBS. You can
press [ ] key to select each mode circularly.
4. Press [Exit] to close the “TV System” menu.
5.3. LOCAL TIME SETTING
When you select “Local Time Setting” and press [OK] then you
will see a window like the one beside (OSD 41):
1. GMT Usage: This item is used to set the time by using the time
signal from the satellite. Press [ ] to change the setting.
2. The “GMT Offset” item is only available when “GMT Usage”
is set to “On”. Press [ ] to set the “GMT Offset” value.
With every time you press the button the time offset will be
increased / decreased by half an hour.
3. Summer Time: this option is only available when “USE
GMT” is enabled. Use [ ] to switch on/off the summer
timetable.
4. “Date” and “Time” items are only available when the “GMT
Usage” is set to “Off”. Press [ ] to select one item and
use number buttons to input time and date directly.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
“Time” menu. If the channel doesn’t provide time information,
you have to input the date and time information manually. The
most channels support the time signal.
5. Press [Exit] to exit the menu.
5.4. TIMER SETTING
When you enter “Timer Setting”, you will see the window like
OSD 42. You can press [ ] keys to set Timer number,
and there are 8 timers in total. When you press [OK] key you
will see a screen like beside (OSD 43):
1. Timer Mode: There are several modes for Timer to setting,
include Off, Once and Daily.
2. Wakeup Channel: press [OK] key to enter channel list and
select channel that you want to setting.
INSTALLATION
OSD 40
OSD 41
OSD 42
OSD 43