Operation Manual

PAG.
13
rev 1.1
ENGLISH
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. POWER: Switches the receiver on, or enters standby mode.
2. LOCK LED: Indicates a suffi cient signal level at the IF IN input.
3. DISPLAY: 4 Digits to display the program numbers.
4. IR-SENSOR: Reception sensor for the IR remote control signals.
5. BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
1.2. REAR PANEL DESCRIPTION
1 2 3 45
1. IF IN: Satellite input.
2. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited channel
selection.
3. S/PDIF: Coaxial output for digital audio (AC3).
4. AC IN: Mains input cable.
5. RS-232: Serial Port allowing software upgrades.
6. TV SCART: Output SCART for the connection to a TV set.
7. VCR SCART: Output SCART for the connection to a VCR set.
1 2 3 4
56 7