Operation Manual

USER’S MANUAL· MAX S700CI+
- 23 - MAX S700 CI+ Version 1.1 © FTEmaximal
3.7.6. OSD setup
1. OSD display time:
Enter the OSD display time using numbers or press [◄/►] to
increase or decrease. The max display time is 30 seconds.
2. OSD transparency:
Press [◄/►] to edit the OSD transparency.
3. OSD color scheme:
Press [◄/►] to edit the OSD color scheme (Red, Grey, Blue
and Green).
4. Menu window hor. Alignment
Select the horizon location of OSD to be left/center/right.
5. Menu window ver. Alignment
Select the vertical location of OSD to be top/center/bottom
3.7.7. Mass storage utilities
View the mass storage utilities information.
1. Select storage device
2. Your storage device information.
3. Format the selected device. (Only support FAT32 format right
moment)
4. Rename the selected device.
5. Set the PVR jump time as you need. Forward and backward are
both available.
3.7.8. Password and parental settings
1. Set the menu lock to be Off to unlock the setup menu, set the
lock to be On to lock the setup menu
2. Change the password
3.7.9. Software update
1. Update from file:
Press [OK] button to enter into the USB disk and find out the
software updates
2. Update by OTA.
3. Revert to previous version
4. Save current system software
5. Data import/Export
6. After you choose the updates
Press [OK] button to confirm the update, press [EXIT] button to
cancel the update.
7. You can also save your current software to your storage device.