Operation Manual

USER’S MANUAL· MAX S700CI+
- 21 - MAX S700 CI+ Version 1.1 © FTEmaximal
3.7.5. CI settings
1. You can see the CI status in this menu, when there is no CI
module, it will display “No module”
2. After you insert CI module into the Slot, CI+ matching will start
automatically.
3. Then the status will appear to be Module Inserted. Please press
[OK] to set the configuration of you CI slot.
4. Pin-Code modification: Set the pin code of the CI module.
5. If there is no Smartcard inserted into the module. It will show the
information like the right picture.
When the Smart Card is inserted, you can check the
Smartcard information.