Operation Manual

USER’S MANUAL· MAX S700CI+
- 9 - MAX S700 CI+ Version 1.1 © FTEmaximal
1. Panel & remote control description
1.1. Front panel description
1 2 3 4 5 6 7
1. POWER:
Switches the receiver on, or enters standby mode. To completely switch off the receiver,
you have to use the switch on the back of the receiver.
2. STAND BY LED: Shows if the receiver is in Standby mode
3. LOCK LED:
Indicates a sufficient signal level at the IF IN input.
4. DISPLAY:
4 Digits to display the program numbers.
5. IR SENSOR:
Reception sensor for the IR remote control signals.
6. FRONT COVER: Opening the front cover, you will access to the Conditional Access system and to
the USB connector.
7. BUTTONS:
These buttons allow controlling the main functions of the receiver, and provide the same
functionality as the remote control ones.
1.2. Rear panel description
2 3
1 2 3 4 5 6 7 8 9
1. POWER ON/OFF: Allows to completely switching off the receiver
2. AC IN: Mains input cable.
3. TV SCART: Output SCART for the connection to a TV set.
4. IF IN: Satellite input.
5. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited
channel
selection.
6. HDMI: HDMI output for connecting to a TV
7. S/PIDF: Optical output for digital audio (AC3).
8. VIDEO: Video output for external monitor, TFT or video beamer.
9. AUDIO: Audio output for home audio systems.