Operation Manual

PAG.

rev 1.0

PANEL & REMOTE CONTROL DESCRIPTION

1. PANEL & REMOTE CONTROL DESCRIPTION

1.1. FRONT PANEL DESCRIPTION

1. IF IN: Satellite input.

2. RS-232: Serial Port allowing software upgrades.

3. VIDEO: Video output for external monitor, TFT or video beamer.

4. TO TV: Modulator output for the connection to a TV set.

5. ANT IN: Antenna input for the terrestrial antenna.

6. AC IN: Mains input cable.

7. POWER ON/OFF: Allows to completely switching off the receiver.

8. IF OUT: Satellite output for cascading to other devices.

Note: The operation of another receiver at the same time is only possible with limited channel

selection.

9. TV SCART: Output SCART for the connection to a TV set.

10. AUDIO: Audio output for home audio systems.

1.2. REAR PANEL DESCRIPTION

1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver,

you have to use the switch on the back of the receiver.

2. LOCK LED: Indicates a sufﬁ cient signal level at the IF IN input.

3. DISPLAY: 4 Digits to display the program numbers.

4. IR-SENSOR: Reception sensor for the IR remote control signals.

5. FRONT COVER: Opening front door, you can access to conditional access system and USB 2.0 con-

nector.

6. BUTTONS: These buttons allow controlling the main functions of the receiver, and

provide the same functionality as the remote control ones.

1 2 3 4 65

4 5 6

ENGLISH