Operation Manual

User’s manual · MAX IPT150
Technical changes and mistakes reserve - 26 - MAX IPT150 Version en_1.0 FTE Maximal
8. Installation
Over this menu you can search for new channels Channel Search,
modify the frequency list MUX Management, or make backups.
8.1. Antenna power
If you use this receiver with an active antenna DVB-T, you can give it
directly 5V for feeding it.
For this select with the buttons
the line Antenna power
and then press OK.
Select now with
the line 5V and then press OK.
8.2. Channel Search: Terrestrial
This receiver has no pre programmed channel list, because DVB-T
configuration changes in every different area.
Start the channel searching process by pressing the Green Button.
The receiver searches now in all TV frequencies.
You may stop searching by pressing the button Exit .
Once the search is finished, you must confirm if the new found channels have to be stored.
Press for confirm the OK-button.
Now you come back to menu Channel Search.
You can start a new search again, or you can close the menu now with the button Exit .
Search status
Current channel
Radio Channels
detected
Channels which the receiver
has found, currently 11
Signal Power and Quality
meter related to the selected
frequency