Operation Manual

16
MENU GUIDE
II-2. DiSEqC Switch
1. Select Channel Search in Installation using ̵̷
and press OK.
a) If you select DiSEqC Switch and press OK on the
menu will be, DiSEqC Switch Page will be dis-
played.
b) Select the proper Satellite of each DiSEqC port
(A~D) using ඔඖand ̵̷ and press SEARCH.
Selected Satellites will be searched automatical-
ly.
II-3 Motor Setup
1. You can move the cursor using ̵̷ and press OK
when you select the value that you want.
a) Motor Type : DiSEqC 1.2, GOTO-X
- Press OK to display Motor Type
- Select the proper Motor Type and then press OK.
b) Satellite
- Press OK to Display the Satellite List Box
- Select the proper Satellite and then press OK.
c) Drive & Driver Step
- Select the direction usingඔ ඖO~lz{Vlhz{P.
d) Frequency
- Press OK to Display the Frequency List.
- Select the proper Frequency and then pres
s
OK.
e) Motor Movement
- Search the appropriate position of the selected
Satellite usingඔඖ.
II. INSTALLATION
(2012 11 05) manual.indd 20 2012-11-05  8:48:13
MAX_COMBO_NET_manual_print REV2.0.pdf 20MAX_COMBO_NET_manual_print REV2.0.pdf 20 31/01/2013 12:51:4131/01/2013 12:51:41