Manualshelf

Operation Manual

ManualsBrandsFTE Maximal ManualsDigital ReceiverMAX COMBO NET
11121314151617181920
7
GENERAL INFORMATION
IV. HOW TO SETTING RCU FOR TV
I. Manual Search
At first, Turn on the TV
1) Press
Device LED Key ( STB or TV or VCR or DVD ) + "OK" key
at the same time during 2 or 3 seconds.
Then the Device LED Lamp will be on Setting Mode.
2) Find the 3-Digit code of Device in brand list and input 3-Digit code accordingly one by one. - The Device LED
will be twinked ontime one by one also. When you finish inputting 3-Digit, the Device (TV or VCR or DVD) will be
turned off one time.
3) Then click OK to finish setting. (The Device LED will be turned
off after twinkling 2 times.)
*NOTE : If you are not able to find the TV code which you are watching currently, please perform the below "Auto
Search". Then RCU will find the proper code automatically and it will work properly.
II. Auto Search (Using Up or Down key)
1) Press
Device LED Key ( STB or TV or VCR or DVD ) + "OK" key
at the same time during 2 or 3 seconds.
Then the Device LED Lamp will be on Setting Mode.
2) Press
Up or Down Key
of RCU to find out equivalent device. At the moment of RCU matching to the equiva-
lent device, the device will be turned off.
3) Then click OK to finish setting. (The Device LED will be turned off after twinkling 2 times.)
III. Factory Reset
1) Press
TV LED +
REC button at the same time during more than 5 seconds.
2) Device LED will be turn off/on "TV DVD VCR STB" 3 times one by one and RCU will go to default mode.
MAX_COMBO_NET_manual_print REV2.0.pdf 11MAX_COMBO_NET_manual_print REV2.0.pdf 11 31/01/2013 12:51:3831/01/2013 12:51:38