User`s guide

User’s Guide · IPS – IPT – IPQ – IPLanTVManager
- 18 - IPS – IPT – IPQ – IPLanTVManager Version_en_1.0 FTE maximal
Selecting a network, and clicking “Scan”, the application starts the search for every services belonging to this network. If
we tick the option “All Available Networks”, the search will be done for all available networks for the satellite/operator.
This action is equivalent to do an automatic search for the satellite/operator.
If you want to search for a satellite/operator that is not in the list, you can add it executing the menu option “Admin.
xxx/Add xxx”. In the following window you introduce the name and the set of frequencies for an initial automatic search.
DVB-S / DVB-S2 DVB-C
In order to modify the data of a existing satellite/operator, you can select this one from the list, and click on the menu
option “Admin. xxx/Modify xxx”. If you want to delete all data about a satellite/operator, you have to select this one and
click on “Admin. xxx/Delete xxx”.
Unlike the satellites/operators list, the only modification permitted on the network list, is the deletion. Therefore, if we
want to delete the data of a network associated to a satellite/operator, we have to select the network and click on the
menu option “Admin. Networks/Delete Network”.
b ) Automatic search in DVB-T devices
The application shows a window to introduce the world region where we are, the subzone where the results will be saved,
the channel bandwidth and the hierarchy that are used for the target services. In the most of the countries the channel
bandwidth is 8 MHz, but in other countries can be different (6 or 7 MHz).
After clicking OK, the application will search for in all available channels in the selected region. In this case, all services
that are found, are grouped under a network that is named as the selected subzone. The results are presented in the
same way as other searches.
2.4.2.3. Service/Frequency list
After any kind of search in any device, all services that have been found will be stored in a database of services and
frequencies. There will be four different databases corresponding to each device type. The services (SPTS mode) and
transponders (MPTS mode) in the database are displayed on “Database” tab.
In the case of DVB-T devices, the available services/frequencies are grouped in world zones; meanwhile, in the case of
DVB-S/S2 and DVB-C devices, the available services/ frequencies are grouped in satellites or cable operators and
networks.