User`s guide

User’s Guide · IPS – IPT – IPQ – IPLanTVManager
- 16 - IPS – IPT – IPQ – IPLanTVManager Version_en_1.0 FTE maximal
If we tick “All programs in the same Network” for transponder case, the application will search for in all transponders
associated to the same network. This action is equivalent to do an automatic search in a given network. During the
services search, the application shows up the process state by the following window:
If we click on “Abort” button, the search is cancelled and the services/frequencies found at this moment, are shown up.
Once the search is finished, the resulting services/frequencies are highlighted in the “Database”.
2.4.2.2. Automatic search in DVB-S, DVB-S2, DVB-T and DVB-C devices
The automatic search allows the search of all services included in the input signal. In order to search we have to execute
the menu option “Search/Automatic Search”, having selected the “Database” tab. As in the manual search, to execute the
command implies the deletion of a previous services configuration in the device, and the application will warn you.
Depending on the device type:
a ) Automatic search in DVB-S, DVB-S2 and DVB-C devices
The application shows the following window that invites you to introduce the satellite or the cable operator in which the
search results are going to be saved.