Operation Manual

User’s manual · MAX IP90
Technical changes and mistakes reserve - 3 - MAX IP90 Version en_1.0 FTE Maximal
0. Control elements and connections
0.1. Receiver front panel
1 2 3 4 5 6
1 POWER: Switches the receiver ON or in Standby mode. For total switching off, use the main
switch at the back side of the receiver.
2 POWER LED: Indicates that the mains voltage (90-230 VAC) is available.
3 LOCK LED: Indicates a sufficient signal level at the input
4 DISPLAY: 4 Digits to display the program numbers.
5 IR-SENSOR: Reception sensor for the IR remote control signals
6 BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
0.2. Receiver back panel
1 2 3 4
5 6 7 8
1 ETHERNET: Network connection of the receiver.
2 RS-232: Serial port to update the firmware of the receiver
3 AC IN: Power cord 230VAC/50Hz.
4 POWER ON/OFF: Main switch to switch off totally the receiver
5 AUDIO: Audio output for home audio systems
6 VIDEO: Video output for external monitor, TFT or video beamer
7 COAXIAL S/PDIF: Coaxial output for digital audio (AC3)
8 TV SCART: SCART output for connecting one TV set