User`s manual

User’s manual · ETWF 310
- 4 - ETWF 310 version_en_1.1 FTE maximal
1. Select Device
The field strength meter allows carrying out the programming of one or several modules from an only modules.
Without interconnection of modules.
An only module connected
Interconnection of several modules, you can select which
module you wish to program.
2. Device Status
In the option “Device Status” are specified the main parameters of the module at this moment.
- Front End: It indicates whether the module is hooked or without signal.
- Output bit rate: Transfer of data in the module output.
-Temperature: It indicates the current temperature of the module in ºC.
3. Set Front End
With this option you will be able to configure the input parameters of each one of the two A/V inputs:
- Input selecting: It allows selecting the input that will be configured. In order to configure input 1, please select 0 and if
you want to configure input 2, please select 1. Once the input has been selected, the rest of the parameters of this menu
will configure the selected input signal, with the exception of the parameters for “Video Resolution” and “Codification
Rate”, which are the same for both inputs.
- Audio mode: It allows selecting the audio mode of the output. Options: Stereo,
J.Stereo, Dual and Mono.
- Audio rate: It allows selecting the audio rate in Kbits/s. Options: 64, 96, 160,
192, 256, 288, 320, 352, 384, 416 and 448.
- Coding rate: Coding rate of the output video. Options: Auto or 0-6750 Kbps.
- Video framerate: Number of images per second. Options: 50/60.
- Video Relation: Output Image Relation (appearance). Options: Auto, 1/1, 4/3,
16/9, 2.21/1.
- Video Resolution: Output Video Resolution. Options: 360x480, 352x240,
176x120, 480x480, 545x480, 720x480.