User`s manual

User’s manual · ETWF 310
- 13 - ETWF 310 version_en_1.1 FTE maximal
- Delete Services
1. Select the option “Delete services”
through Up/Down buttons. Press OK
to continue.
2. Select the service you want to
delete with the Left/Right keys. Then
press OK over “-Rem” in order to
remove it, or press OK over “--All” in
order to delete all the services of the
multiplex.
3. A window will appear and it will let
you know that the operation made has
been correct.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
- Change service name: It allows changing the name of the service manually.
- Date / Hour: Setting of the date and time of module. It is appropriate to maintain these parameters set in order to have
the registration of errors linked to the current time and date.
- SW version info: It allows you to visualize the basic information of the module: model, firmware version, etc.
- Global Update: It allows carrying out the update of all the modules that are interconnected at the same time.
- TSID: Transport Stream identification value.
Note: It is recommended to configure a value different from TS ID for each one of the output multiplex
configured.
- NID: Net identification value
- ONID: Original net identification value
- Network Name: Name associated with the net.
- LCN: The LNC function allows assigning automatically a predetermined position
to each one of the services of the multiplex. This function will allow the users who
have a receiver with LNC support to make the ordination of channels
automatically.
Select a channel through Left/Right buttons and introduce the position. Press the
“OK” button and the cursor will be placed over the number. With the keys of the
cursor, we can move through all the digits and change the values. Press “OK” in
order to save the changes
Note: If in the existing installation there are already services that have LNC system, you will have to configure
the position of the module services in order to avoid conflicts with other net services.
ETWF310
Operation finish
ETWF310
Output 032%
PID:00256 TR391 CH1#
-Rem --All
ETWF310
BW usage 032%
>Delete services
Add services
ETWF310
LCN:00010 TR391 CH1#